Alexmoss problem

Discussion in '2 Axis Gimbal' started by Jason Herring, Sep 29, 2013.

  1. Jason Herring

    Jason Herring Member

    Joined:
    Apr 7, 2013
    Messages:
    278
    Likes Received:
    12
    Man, I have tried a anti viberation plate from a firm mount to very lose and I can get the shake from my brushless gimbal
    Any ideas?
     
  2. kjetil tønnesen

    Joined:
    Aug 16, 2012
    Messages:
    417
    Likes Received:
    23
    Can you xplane more please?
    is your gimble shake when you fly it or is it the alexmos that do the shake?
     
  3. Jason Herring

    Jason Herring Member

    Joined:
    Apr 7, 2013
    Messages:
    278
    Likes Received:
    12
    I'm using an Alex moss board, I'm getting a little vibration it looks to be in the tilt, and up and down, it's very hard to tell. On the ground it works perfect you can move it like crazy and it hold the horizon great, I wish some could put together a good vide on how to tune it and shot video to back it up with, thanks all for the help
     
  4. Graydon Tranquilla

    Joined:
    Oct 8, 2013
    Messages:
    159
    Likes Received:
    15
    I had the same issue...... with a Martinez board and it was not a PID tuning parameter but a motor magnitude adjustment...... The motors need just enough torque to get the job done..... too much and there is continuous oscillation.
     

Share This Page