/dist/images/branding/favicon

Akira Firmware and Pan Creep\Slop - settings

Discussion in 'MōVI M15' started by Graham Futerfas, Mar 30, 2016.

  1. Graham Futerfas

    Graham Futerfas Well-Known Member

    Joined:
    Oct 19, 2015
    Messages:
    1,261
    Likes Received:
    245
    Hi, I've been noticing in Majestic Mode with the new 5.0 firmware that my Pan movements are not as accurate as in the older 4.2 version of the firmware. If I start a pan, and then try to stop it, the Movi keeps creeping a bit more, and I'm having trouble accurately stopping the movement.

    After I first noticed it, I tried messing with a number of settings to fix this, including the window, smoothing, Pan Hold, Filters, Jolt Rejection, and Max Rate - but nothing seemed to help. I did a real-world shoot with it and it wasn't horrible, but today I finally had time to go back to the old firmware, and the slop was gone. I found it to be much more accurate, and could stop the pan exactly where I wanted.

    Has anyone else noticed this, and does anyone have suggestions on settings that might fix it?

    Thanks very much,
    -Graham
     
  2. Graham Futerfas

    Graham Futerfas Well-Known Member

    Joined:
    Oct 19, 2015
    Messages:
    1,261
    Likes Received:
    245
    I will add, that I downgraded back to 4.2 to do some testing and bind a radio, and after I re-flashed version 5.0, the panning became much more accurate. Not sure what fixed it.
     

Share This Page