Hi everyone, we are developing a new HD wireless transmission system which will be way more affordable that known systems, but with a great data rate (up to 75Mbit/s), low latency (4ms) and very fast reconnect. Please watch our recent range test with a Cinestar CS6: The system is already available. Please contact me for details ! Regards Johannes
Looks awesome! What is the price in the USA? And when is it shipping? What kind of power requirements does it have?
Hi, we have some prototype units (fully working, POM enclosure) in stock and can send them out right away. The version with final enclosures will ship in 4-6 weeks time for those who have ordered and prepaid. Price is 4990 euro for the complete set (Tx with 2x 7dBi Antenna, Rx with 2x 19dBi patch). Yes, we are using 5.8 Ghz. There might be a 900 MHz version later on for the US market. If you want you can have the 5.8G version with 250 mW output power. The UAV set has HDMI connectors only. We will also offer a Rx with HD-SDI out later. There will also be an on-camera solution for shoulder cams with HD-SDI in on the Tx and HD-SDI out on the Rx, and V-mount battery plates on both Rx and Tx. Power requirements are 7-24V, max 10W. You can power the Tx with a 2s Lipo for example. By the way.. this is ideal for the MöVi also.. Regards ! Johannes
Hi Johannes. Very interesting system. Can you share any product photos of the TX & RX? Would like to see layout of the connectors, the overall configuration and mounting points. Thanks! nick
Hi Nick, I will shoot some photos these days. I have a nice new video, though, showing an indoor testflight: Regards ! Johannes
Johannes looks like two hi gain patch antennas on the RX and the antenna for the TX hanging beneath the copter about 300 cm?
Hi Gary, as I wrote we use 2x 19dBi patch antennas on the Rx and 2x 7dBi straight antennas on the Tx. In the video I had the Tx antennas hanging about 20cm below the copter. It also works well with the Tx antennas mounted to the Tx just the normal way, Regards Johannes
Hi Nick, I made a little packshot today... please remember this is a prototype version. But the final product will look very much the same. Regards Johannes