Hey Guys, I recently stumbled upon a handy little tool for powering follow focuses, monitors, and teradek/paralinx set ups on the movi. I haven't really seen anybody on the forum mention this. Hawk-woods makes a little plate that runs on Sony EX1/EX3/PMW200/PMW300/FS7 batteries and has two p taps. I like to mount this on a manfrotto nano clamp atop the movi to power all my accessories. http://www.hawkwoods.com/products/d...mToSlide=7&asi=BP-75U&asi2=BP-2X2&asi3=BP-60U Thanks, Zach
This is my new favorite power plate: http://www.bhphotovideo.com/c/product/1078951-REG/maxell_261401_power_shoe_adapter_bp_u.html It uses 14.4V Sony BPU batteries (same voltage as Anton/Bauer and V-Mount), and it has a P-Tap and 4-Pin Hirose out. I also make a cable that can break the 4-Pin out to more P-Taps: http://mediablackout.net/product/lemo-to-p-tap-multi-breakout-cable/