3 axis star plate dimensions

Discussion in '3 Axis Gimbal' started by Grant Campbell, Jul 24, 2013.

  1. Grant Campbell

    Grant Campbell New Member

    Joined:
    Jul 22, 2013
    Messages:
    12
    Likes Received:
    0
    Does anyone know of anywhere online where there might be a diagram of the measurement specs for the gimbal star plate (octo) and the vibration dampeners?

    I'm fabricating an attachment plate for my star plate and dampeners and want to know exact measurements before I start drilling. I know I can do it with a measuring tape (and/or line up the star with the dampeners attached to the new plate and mark the spots) but there's some play in the dampeners so I figured a spec diagram might help.

    Thanks
    Grant
     
  2. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Grant there are no diagrams with measurements. Personal opinion. With all of the blatant ripoffs off Freefly's designs I don't think there will be a sharing of any of the design specs. At least from Freefly.
     
  3. Grant Campbell

    Grant Campbell New Member

    Joined:
    Jul 22, 2013
    Messages:
    12
    Likes Received:
    0

Share This Page