/dist/images/branding/favicon
Separate names with a comma.
Hello Jose, I had an issue with a couple of ESC's (they had different firmware and some of them didn't have boot loader) and now I could finally...
Hi Darren, the footage was due end of november. Thanks anyway.
Some more pics of my build: [ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]
I sent an e-mail to the manufacturer of the C25 quick release system, asking about the optimum position for installing the booms at center frame....
Starting the build. Put main parts on scale to have an idea of total weight before assembly. Main Frame: [ATTACH] Motor Mounts: [ATTACH] Main...
Before starting the assembly of copter I did some further tests with the boom mechanism to be sure (at least try to be sure) it will not fail on...
I have been researching for quick release systems for a long time, and had quite a few issues with some makes I got at the past. Normally the...
The main objective of this project is to build a dual purpose multirotor, able to fly heavy lift payloads for videography and lightweight cameras...
Hi, does anyone have Cleveland and Barcelona daylight iconic shots to compose a production? Or know of anyone that might have some available...
We have similar contact cleaners. Thanks.
Well, we live in Brazil, which is tropical. And Porto Alegre has a high relative humidity, 70%.
Steve, these are indeed much better design, with no moving components. If it starts to loosen, you can always spread the parts apart and adjust...
Andy, if you take a closer look, you can see where the rotating coils should touch with the inner pin, but actually they are covered with some...
Well, I opened the EC5 connector and it looks nasty! The reason I couldn't get power on the first attemps could be the bad contact due to to...
Steve, I will also inspect battery pack EC5's, but these packs are brand new, and it would be really odd 3 of them having problems. But we...
Alex, I also suspect the only past subjected to a failure on this situation would be the main power leads. So as I mentioned, I made a new lead...
Hi Andy, No LEDs at all completely dead.
Hello, last Friday I had a really weird experience as I was preparing for a job. When I plugled the battery to my cinestar, nothing happened,...
Yes, at the beginning the arms were stiff enough, but after a few flights they probably lost the original rigidity and started bending. That...
Hi Andy, I posted an update on this old thread that you helped me with. Irt might be useful someday....