/dist/images/branding/favicon
Separate names with a comma.
I believe the Movi controller is also 5Ghz, hence my suspicions... But anyhow, are you saying that you've never lost connection w/ your movi while...
Seems like the tomahawk is overpowering/interfering w/ my MC signal. Am I crazy? I have them as far away from each other as possible but still...
Spendy indeed but Im hell bent on making it work. Its just a little frustrating because I'm sure a quick update to MK-TT would fix the issue....
Thanks Dave. The shooting conditions will be pretty extreme so the goal is to be as light and nimble as possible. I can carry a tablet in my coat...
My objective was simple, a small portable set up to fly impromptu waypoint missions. I'm basically looking for functionality similar to the 3DR...
If you want to use auto tune, it Seems the temp solution is to roll back to 3.08
Hello Wondering if anyone knows how to map a switch on a graupner Mz-24 to control the gimbal mode of a Movi; kill, majestic, and dual? 75% of...
Thijm While my specific Voltage/prop/motor combo isn't listed on the 4012 motor sheet, my test results show that I'm still w/in spec for...
thijm- Is your suggestion to preform the same test with 7x 15" props and 1x 16" prop? David- Thanks for the photos. I ordered an external...
Motor test complete: ran @ 95amps for approx 7mins. Results below, I put a line through the likely bad readings. [ATTACH] [ATTACH] [ATTACH]
Just did a prelim motor test to get temps. I guess the best way to simulate my payload is to throttle up to the average current draw (94a) while...
Dave- Gonna double check my weight this am and report back. I have 500mm booms so I guess 16" props are out? Regarding battery placement, can you...
Thanks Thijm, I posted before seeing your message and attachment. Sounds like the 4120's are the way to go.
First, Copy that on the compass connection, thank you. Next, The Velcro is for a custom made weather cover that wraps around the bottom of the...
Ah ha, didn't know that existed. I will check if it's compatible w/ MK GPS v.3 Here's what I'm using for motors/props: [ATTACH] [ATTACH] [ATTACH]
Ok, so at hover, average current was around 89amps, w/ low around 81.7. At one point, while ascending, I actually spiked to 107.3 But again,...
Thanks very much for the feedback. My AUW is exactly 28lbs. Seems like the only way to reduce the amperage would be to lose some weight, yeah?I'm...
Anyone have a solution? The neck stap is no bueno for extended use. Thx
Perhaps the redrock isn't connecting because your hand-wheel unit is on and overriding the controls? Mine does this with the auxiliary finger...