/dist/images/branding/favicon
Separate names with a comma.
I haven't tried them myself, but seen a rig + gimbal attached to a car before !!! NOT SURE OF Security !!!...
Daniel, I have been having similar issues, and ended up adding around 400g to get my stiffness to 20 ! Also I added a secondary anti vibration...
Thanks Clive for the above comment. Will have a try.
It was suggested that my stiffness value on tilt was not high enough and I need it to be 20 or higher, also I could do with adding extra weight to...
Thanks Janne
Thanks Steve for the information, I have been trying different settings including UAV hardware modifications, I am slowly heading in the right...
Hi Janne, Are you no longer using the expert settings ? "Stiffnes, Pan 97, roll 76, tilt 25. Expert hold, tilt 22, roll 14, pan 10. Gyrofilter...
Hi Jonathan, did you have to add any extra weight to the gimbal to achieve the values mentioned 113/67/21 ?? Cheers
Via a secondary quick realise plate, but without the secondary anti vibration plate, the Z15 has an inbuilt one on the four corner mounting...
I don't think I am able to source different strength isolators, they can handle unto 600g each and I have 8, so that should cover me to 4.8kg. Yes...
Thanks for your reply guys Gary, as requested the mounting of the Movi 5 Kind Regards Zaid
Tuukka not wishing to hijack your thread, I am having a similar problem to you with the Movi5 I have been in touch with the support team for some...
But you shouldn't have to do this, I have asked the support team about this issue, but unfortunately no real solution amognst other issues we are...
Valid Point Steve.
My post is referring to the update process - hit / miss, I couldn't tell you what my stiffness setting is as I cannot connect anymore as a result...
Same problem as above, battery 99% Bluetooth was NOT interrupted, the process was completed, powered off & On= dead gimbal with three green...
Hi Scott, can you please expand on how you managed to power up from the SBus. Did you connect the (satellite wire from the Movi5 to the AR8000...
Hi guys, How do you trigger your shutter if the receiver has no spare channels? can you plug in an AR8000 or similar that will increase your...
Hello Everyone. My name is Zaid from www.SkyhawkAP.co.uk, based in North Wales UK, been involved in photography on and off for 15 years and flying...