Separate names with a comma.
He admits relying on GPS the whole flight... [IMG]
So I spotted this video on sUAS News... [media] I'm 100% sure its a DJI S800, the camera looks like a NEX5. Fortunately the pilot missed...
Many thanks guys! Mark.
Arthur, will the Radian work on 5.1V output from a Castle's CC BEC? Thanks. Mark.
Andy, I received my Radians with Castle's CC BEC, but their output is 5.1V, not 6V. Does this affect performance on the Radians and Servos?...
Well actually, if you use 2 batteries your adding weight to the rig, but longer flights, so with the MK tool you can check how much amp is drawn...
So you probably know how to use the MK GPX tool, In my case I use it to see if the battery holds its voltage under heavy amp draws.
Firstly, do you have a micro SD card on you Navi-Ctrl? [IMG]
Yeah I also think thats distro board... I sent mine in to Quadro because for something so crucial as it, I wont dare to find out it does not work...
Andy, I believe those you tested are different from these, the one you tested is 40C rating, these are 120C. Mark.
Anybody tried the MaxAmps LiPo 10900 4-cell 14.8v Battery Pack ("true 120C rating")? www.maxamps.com/proddetail.php?prod=Lipo-10900-148-Pack&cat=361
I decided to send the distro board to our friends at Quadrocopter, yesterdey I connected directly the FC to the distro, and it did not resolved...
So I borrowed an MK GPS, Navi-Ctrl and FC. I swapped each individually and got the same amount of I2C errors on the scope test. While doing the...
Andy, good morning. I did the test with all the ribbons connected (it does not let me turn on engines while disconnected, and would not be able...
Awesome, so these are the results of simulated flight without props, while running I2C error scope on the MK Tool: 1- As soon as I calibrate the...
Bump...
Andy, no worries at all. In step 3, what values do you recommend to spot the I2C errors? In step 6 you are referring to window where it shows...
So I flew tested it with the MK GPS disconnected from the Navi-Ctrl and the flight log did not record. Same I2C errors, 26 and 41 while everything...
Andy, good morning. If I disconnect the Navi-Ctrl, how will I detect the I2C errors? Wouldn't it stop recording the log if I disconnect it? Mark
I verified all connections and are all OK, I re-upgraded software, and get the same I2C errors, all BL's look fine. Dont know how to troubleshoot...