/dist/images/branding/favicon
Separate names with a comma.
Is this still available?
Is this still available.
MOVI PRO HANDHELD BUNDLE - I purchased this MOVI PRO bundle for a shoot that didn't happen. I have assembled it and used it for a total of about 1...
I found that by replacing the top and bottom plate with a stiffer material, in my case G10, I was able to completely elimate the flex and...
Personally I have loved the design overall. I originally my octo frame from quad copter when they first came out so the top & bottom plate were...
My latest iteration of a HL copter is as follows: CS 8 Frame Maytech 40 Amp ESCs Tiger 4120 RCTimer 16x5.5 WKM Flight Control 2 x 10000 Mah Pulse...
Obviously I have a completely different rig and there is no real way to compare any rig even if they have the same specs but... I have been flying...
There is a lot I do not know but I did try this at one point and the system simply flipped over. It is my understanding that there would need to...
Have you tried the rctimer props? Aerialpixel.com has them in LA.
What is the total additional weight? It is a problem for me too since I am throughing 18" props on 700mm booms but it might be self defeating with...
The problem is the Wookong needs to be able to send the correct "signal" to the ESC's to get them to tun on and I had the same issue when I...
really need a 3520-11 KV 400 motor!!!
Finally getting to the brushless portion of my beli meal.
Dave King: I agree with your assessment of the 3515's. To add fuel to this fire i have an Octo (Cinestar 8) configuration with 3520's and can lift...
Rotational speed! Since KV is rotation per volt, the blades are faster not to mention the other law of electricity; high voltage means less amps...
Currently using the Wookong-M with Tiger motors and had a very similar issue of Yaw which was enhanced with weight. I found through about 2 weeks...
Since the "Distro" board is a pancake circuit board it is unlikely that you will be able to fix the board to its original functionality but you...
I have had that happen and found that by simply disconnecting power and reconnection it cleared the system and allowed me to fly. Some times it...
What got me was the thought that the clockwise counting in MK, from boom one, was reversed in the DJI FC . So that I ended up with the left and...
Chris I have attempted to fill that out and use that tool but for some reason I am unable to provide it with the proper information to get any...