Separate names with a comma.
[media] Here is the first test flight with my custom built brushless gimbal and the Sony 760. Its not bad but still some tuning needs to be done...
Its mounted on the Cinestar gimbal with the mount made for the Cinestar gimbal. I will try to get screen shot tomorrow possibility. One more thing...
Its not even close to 30 degree bank. I think its a problem with the way the radians work or firmware/hardware. I have tried different settings...
Yes Iam using Radians on both axises and yes you can duplicate it on the ground like you said. Also it is the lastest firmware for the radians....
Yes I meant Aileron input so its not just me having that issue than. Michael64
Iam having an issue of the horizon going off when I turn using AL. If you fly level and make flat turns with just a touch of AL its very small,...
Hello Tabb So I cannot connect it to the AUX 3 knob, I like to have the knob so when looking at the monitor I can adjust the pitch for what I...
So what is the answer to get the radian connected with single person and only the flight reciever to have control of the tilt is this possible. I...
Also in the wiring diagram way the two wires to receiver is one powering and the control is it possible to just power the radian from the other...
Not sure about the output, but will check that out. One more thing is on the Cinestar gimbal what is the setting for the deadband. I have a little...
Hello Andy, Just to make sure Iam explaining it right Iam only running the one receiver for the Hexa and gimbal its not two man setup. The...
Currently have a radian on the roll and got it working really well. Now thinking about adding another one to the pitch axis. I have a 2 axis...
Yes talking about the roll sorry for not stating that in the thread. I had set the roll to 130 but when connected back up it showed 100 so that...
Hello Andy I had the Dont Confirm checked maybe thats it I will check it in the morning. Also when flying and turning the horizon is slow to level...
Running a single axis radian on my 2 axis cinestar gimbal and having trouble changing gain. When I change gain and go back and look it back to...
Sorry Double posted this
Do you have the old or new GPS for the WKM. The old has two black edges on it and the new one is solid white when looking from the top. The new...