Separate names with a comma.
Yes... this happens. You have torn the pads off the PCB and permanently damaged the unit. it is not repairable. The issue is the weak and poor...
Here in Michigan, Generally - we use the 3-mile / 300alt / 900ft out rule. We have contact the Airports, gotten permission / approval and...
Hello. Did you get support for this job ?
Yes, we have also had this issue ...it is Spektrum Rx . We hallways had an issue in the "input channel monitor" screen. If the wires are not at...
I'm very interested in the conversion kit as well. I was looking to design my own kit... Let talk about the parts you need, because I have a huge...
We just mounted a RED Epic Monday. 200mm boom arms, Dual Bearing Tilt Axis to replace Pot Longer drop tube, 2 of the metal boom clamps @ Longer...
We have had a HUGE issue with our Radian's on cold days. The issue is only with the TILT axis. Every time there is an issue, we will loose static...
All, If you missed it, I made some PolyCarb mounting plates for the CS8 that allow for a Hungry Power systems distribution unit, as well as...
Our rig has Castle Creations 75A ICE lite ESCs . We have had great luck with the ESC program set to Medium startup, while keeping the WK-M Idle...
We are looking for an improvement in Michigan's gusty and unpredictable wind conditions. Wind speeds here are consistently 10-15+ ( MPH ) every...
Sweden looks like American College Bars ( where the girls are at )... UK looks like American Sports Bars (Jocks - Ugh ) .. ;)
Consumables are as listed Props GoPro housings Boom arms Boom Clamps Batteries Bearings 3 of our motors are staring to show signs of wear. I'll...
Sounds like the kind of crash(s) that made us change from MK to WK-M. Hope you get it back up to speed ASAP.
Hello everyone, We have searched extensively and haven't found a good info, We are looking to to capture reasonably fast automotive movement,...
Great discussion. My Camera Op ( and Business Manager / Partner) and I will discuss and get back to everyone with our input.
While it the Radian stabilizer can give good results, its not great on a CS8 OCTO in higher winds. *note, we have tried alot of the setting...
There are a few questions I have, or items to note that i didn't see in my quick scan of the thread. We had a few issues with hardware vibrating...
Wes, Did you check / are you sure you COG and IMU/GPS mount locations are correct ? Also check your ESCs. Do they have a control interface ?
In our limited experience, we have also been very happy with the APC. New CarbonFiber props will get a trial today.
We need to decide which remotes to use. Currently we have the following to pick from: - Graupner Hott MX-20 2.4GHz 12 Channel / GR-24 - Futaba...