/dist/images/branding/favicon
Separate names with a comma.
Don't remember all my settings but do know that my vertical stiffness is set as low as 5 when flying with M10 and Red.
Tune down vertical stifness and hold strength under height dynamics, and also tune down horizontal stifness and hold strenght under the position...
For me, the biggest problem with the restrictions, especially the max distance, is when taking off from a moving object. The most dangerous...
Hi Chris. Is it oscillating when your on the ground in airborne majestic? If so, thats normal. It should go away ones you take off and switch to...
Hi Mike, I had the same issues as you described. When flying the M15 (with Red powered by a FF movi lipo) everything was fine with default...
Hi Bo, there is workarounds that will give your Controller good enough range for most situations (aerial work up to 500 m line of sight). With a...
Alex, I have also had troubles with the app not writing the settings. Exactly the same happened to both me and a friend of mine. We both got our...
I got the same thing yesterday, flying or M10 for the first time with the Alta. Usually fly with the M15, and have never seen this vibrations....
Thanks Andy!
Yes, switching antennas is plug and play. Just open up the receiver, unplug the old one and plug in the new.
Derek, I replaced the antenna with a standard Futaba 2.4 Ghz FASST antenna. I bought it from the Norwegian Freefly distributor. Tried to find it...
We been using the booster for half a year now, and it works really well. I did a test with the controller + booster and a Phantom2. Flew the P2...
Hi Alain, Nice work! Is this something your planning on producing and selling? Im really interested in such a product, going from Movi to...
This happend to me when the Movi controller were low on battery. Try changing to a fully charged one, might help!
Is it possible to change between handheld and airborne mode with the controller? I can't find it in the menu. Would love to be able to use the...
Done it a few times with good results. Removed the side door and half of the seats. Sitting inside the heli with the Movi on a Easyrig. Then...
Its easy to set up, just remember to change the shutter button setting on the controller to "toggle" and you should be all good :)
Yup, the quadrocopter start/stop cable ande the gentLED cable works perfectly with the Red
I made a version out of the 1510 myself, but only with the foam that came with the controller. Added some foam on the side, put the monitor in the...
Maybe you can just hang your Movi on the outside of your backpack? I have done this to mine, and it works really good. In that way you can also...