Separate names with a comma.
[ATTACH] this is what I did to strengthen my frame, ran a tube all the way through the centerplate and had some custom carbon cut...
Yes it can as long as your have a A2 or a Phantom flight controller to power the air unit and feed it OSD data, and your radio is either the DJI...
Oops, totally my fault, I'm running 420kv U7's I ended up putting the t80a esc on my quad that crashed with the maytechs. Seems to fly ok, I can't...
If only people took time to read the video description all the questions they have would be answers. they are 420 kv. Stock settings
[media] Got a set of T-Motors T80A esc, on the bench they work well, alittle slow in the reaction area, but no sync issues on the bench test. In...
I think that most people here have a general goal, to fly safe. I really don't feel like anyone is bashing anyone here, a lot of us are...
Everyone is backing away from U7 support, Even T-motors is distancing themselves
Nice build, but isn't it a bit of overkill for a GoPro?;)
I would say there are a lot variables that will never give us the true answer to this accident. I have to assume that the copter had a blade...
I ended giving up on the KDM due to sync issues and the Castle Creations because of its slow response and lack of support from Castle to just tell...
technically the shutdown temp is around 220f. I start to get concerned around 140f. some people are fine running 180f, i wont do it. did you...
Do you have any issues with sync with these esc? have you bench tested these escs and "fluttered" the throttle to see if they loose sync? if you...
I think that you should go X8, but what Esc are you going to use with those motors that will currently work?
[media] todays tests with KDE 55+ and T-motors U7 420Kv with SYNC ISSUES Had to add a 2.5cm fan to the KDE to keep the temps down around 120f...
TIS BUT A FLESH WOUND... Please tell me you are using the DJI OSD Mark II, and if so, send me the file and i will forward it to the engineers at...
Nothing scientific Andy, these were just stick positions. I will be doing more accurate tests today starting by getting out my Spock ears . I will...
Yes, I saw that, still great results with the U7 compared to any other ESC out
Steve, I picked up 4 ESC's to test today. All Esc's never had a sync issue like with the Maytech 65A. Test setup is T-Motors U7 420 KV 6S 10,000...
So for the U7 you set it to High, 12kHz and out runner mode?
Do you know what PWM timing you set? ran first tests at stock PWM timing and temps look really good.