Separate names with a comma.
I actually thought this was a joke post. IMHO, you're asking for trouble flying in the middle of any big city. There are plenty of examples of...
Agreed that it's wicked $$$ A USB backup battery is the easiest way I've found to keep the mimic powered.
I was thinking about making or finding some 2.5mm thumbscrews. At least they wouldn't require tools to take off. And being larger would make them...
In the movi app setup for controller configuration you can set the roll channel to 0. However, the way I like it is to use dual rates in the...
You could try turning down the stiffness on the roll axis to a very low level. The only other way I can think of is to use the Mimic but mount...
As long as they can turn the radar off you "should" be fine.
I was flying a while I n the same area about 10 meters in front of the radio station transmitter in the 88mhz range. I'm on futaba 2.4ghz rc...
Can you test fly it with a "disposable" copter like a Phantom first? I once flew in the direct path of a high powered radio station transmitter...
I have done it. I have a cage on my camera and that helps a bit, I think. I've never tried it without. It will depend on the lenses used as well.
Probably preaching to the choir, but I just want to acknowledge that investing in good batteries is one of the best things you can do for...
Are these 6s?
The best system I've used is a good 5.8ghz system that has a cloverleaf antenna with a good camera (high dynamic range etc. ) and a diversity...
The prosight camera has a multi strand cable with about 15 different wires in it to go to the transmitter, so it's unlike any fpv camera I have...
I use the sony/zeiss 24-70 f4. Having a little zoom range is a great thing and it's a very nice lens.
Since a TL is usually very high res, you could try post stabilizing with no ill effects.
Yes I'm sure it will, since it will use the same frequency hopping tech, and they say that many of the fpv tx's will work at the same time.
Try changing the channel, as Gary suggested, but also power on the FPV transmitter first, and then the connex, because the connex will switch...
You could be right, Steve. Someday I'll test with a lighter lens. Something else I was thinking about is how to add weight. If the weight was...
I didn't tweak a thing and it has never been better. I did some shooting in moderate wind at 100mm APS-C camera and there were only a couple tiny...
Being seeing a lot of this and I was afraid that I would get the same results, but mine was ultra stable. This is with the A7s2 stabilization on....