Separate names with a comma.
This is a RTF Freefly Cinestar 8 with 3 axis Gimbal, capable of flying larger cameras. It was used only a few times shooting films and tv shows....
This is a moderately used Freefly Movi M10. It was only used a few times shooting one feature and a few days on some TV shows. I have flown the...
Hey guys, I have a director that wants me to do this shot down a hallway while rotating the roll axis with my DX8, creating a dutch mid shot. I...
Hey there, I did find the answer luckily on my own! There is a port on the under side of the Movi rig that is the exact same 3 pin port as the...
Hey Guys, I am trying to spread the power from the Freefly Movi battery to the Movi itself and my downlink wireless transmitter plus the Freefly...
Great thanks! I'll spread these antennas apart for now and I'll get those Rabbit ears, cause I don't want this to ever happen again! Is there...
Then here is the GPX file from Los Angeles this morning!
Hey Guys, First off thank you so much for reaching out! So when the Signal Loss happened I was flying outside of Las Vegas on the border of a...
Hey Guys, I had a super scary experience while flying today in the dessert! During a flight my MX-20 said there was an Signal Loss and at the...
Hey Andy, I just ordered your MK tools DVD cause your Cinestar build DVD saved me in so many ways during my build! But my DVD isn't here just...
Thanks so much for all this advice!! I am still learning and getting comfortable flying in Manual Mode especially keeping orientation! I do have...
Hey Guys, Just was wondering what people thoughts were about flying manually v.s. position hold. When is it better to with Position Hold and...
Thanks Brad I actually just figured it out!
Hey Guys, I have been researching this all day but my pan controls are reversed on my Spektrum DX 8 and I am trying to flip the pan controls so...
Hey Guys, [media] In this video above Tabb talks about setting three flight modes for the Cam Op around 16:30. I really want this function for...
Thank you!! Thank you, Andy!! It worked just as you said, you dont know how many headaches you have saved me!!
Andy, First off I just finished building my Cinestar 8 and I have to thank you for making the process smooth! I am now configuring my Spectrum...