/dist/images/branding/favicon
Separate names with a comma.
Hi Eric Is it possible to help me with the same set up. The Movi in the 44. I have a shoot soon tried it at the weekend and its not good.
Hi guys, we are wondering if anyone has used the MR10 from a Robinson 44. We have a shoot coming soon and the company are wanting to us our gimbal...
Tabb and others thank you for your input. Well a third day was spent trying to go through the complete system. We ruled out the gimbal very...
Guys. This is the echo mount from allied drones. The quality of the mount is first class and certainly surpasses what we had on there...
Hi forum members If any one has read my previous threads you've have noted the difficult times we've been through. This is the last straw for us...
Gary, there are two leads going into the camport. One from the Pan radian which controls the camera settings and one from the Roll which is the...
Yes one of the first things we did. Made no difference. However ponder this. From the Pan radian we run a cam port. Aux is connected to...
Tim / Gary. The CS gimbal and legs sits on the ground at this stage, I haven't put the copter on the quick release plates. Everything is clear...
Im not sure if this is the right thread for this problem but here goes. Today for the first time all was going well, well that was until the pan...
Gary, We have the wookong imu. After searching the web it looks like the oscillations could be a centre of gravity issue on the Y and Z axis....
Hi Gary. I have all eight isolators installed 4 nos 2 and 4 number 5. The gimbal is fully balanced that took me hours. Some one said that it...
[media] Guys, back again. As you all know Ive had a major headache with our system from day one. Well we could never get away from shaky video...
Brad. Not as yet. We were waiting to hear how Ben got on. Now its over to Phil to sort out what we need to do.
As long as I know there's nothing wrong, I can sort that with a few flights hopefully. Its a shock after relying on GPS until now.
OK team. Been in the air for the first time with the new 15x6 props. Some downdraft now!! But we had issues, let me explain. We had an...
Gary, I know you have been following the threads between Ben and myself. We both have the exact same set-up built by the same person. We both...
Ben, you get the same result as us. No difference and we're using the C300 Ive just got the 15x6's today and have spent most of this evening...
Guys, watch that voltage going to the servos. Been there dont it and got the T shirt. 6v or less.
Can anyone tell me please where we can get the heavy duty clamps for the 360 gimbal, the ones for the side arms to stop any slip downwards from...
Brad, now you are going somewhere I haven't a clue about. To be honest I don't know what flight controller is being used or settings. We did...