Separate names with a comma.
Also happy with the 3515 (kw10)
Did you check the ecalc? Don't forget to set your field elevation
for 2-3kg payload right?
Finally done with all brackets. Total weight is now 2700gr (incl 270gr Mount/copter plate, 180gr Decimator & 455gr lipo/Cables) Total copter with...
Thnx for pointing out. Already figured but forgot to post.
Nice to see it worked. Same voltage difference here > 0.7v. I dont think it's anything we can do about.
So now you can even try 7s :p...
To also upgrade the Center pan plate. I disassembled the bracket and noticed that the bearings holding the main shaft do not have an flange.
indeed they are well made and solid. The reason for using them. But with high capacitor esc they can really spark.
The ec5 are in case of arcing...
Just exchanged the Ec5 for Xt90 and arcing is tremendous. Had to use an resistor cable to power up the copter.
Btw. last week some Co-flyers also...
Looks and feels very nice. but will never fit current gimbal design. same problem with fs700. Very expensive compared to the Red epic.
Looks more like KW9
F55 :D still prototype
I'm pleasant surprised how well the new bracket works. Almost stable image.
Btw this new cam does not fit my current CS mount.
While waiting on the measurements for the direct drive motors. Had some time left and upgraded the role cage clamp.
The added weight is about...
Kopterworx uses a custom firmware or settings file for DJI, so there are more options.
I think the Axi 2826/12 are still the best you can get.
Nice Work Howard, Can you share an image?
What is your expected AUW?
Nice! But don't copy paste my settings > got the motor/BL wires wrong so some settings are reversed
Normal Coax setup is Bottom larger then top. This setup was top/bottom same prop > 14x4.7> Correction made in the koptertool.
So i guess 13x6.5...