Separate names with a comma.
Thanks Gary. What do you think about canon 24 mm 2.8 IS lens, Does the image stabilization system of the lens really helps?
Hi Josh, im using the factory rings, the red rings
I live in sonora and we have similar weather than Phoenix, maybe the heat soft the rings, is...
Hi, its me again, i want to know if you want to share your techniques to avoid the front boom when Cinsetar travel frontward. I use a Canon t3i...
Hi, I need your help
Im having problems with the satibilization, i have a CS8, Wookong M, 2 axis Gimbal and 2 radian and im having some ugly...
You are absolutelly right!!! I found the little screw, i tight it and the problem was solve!!!
Thank you so much guys
Best Juan Pablo
Brad, i tight the belt moving the tilt servo but the problem continue. I upload another video showing its not the pull the problem
Gary, im uploading pics to check if i found the set screw. The other pic is the part i think sweeps
Hi, recently i noticed a slight vibration on the tilt. I have a cinestar 8, 2 axis gimbal and 2 radian (tilt and roll)
So when i was checking...
Gary, thanks for the advise, now im appliying the sharp filters on my video
With the focus issue's in dslr, do you think in some case is better...
Thanks Howard, that video was stabilized in post, but this is my setting on my 2 radian system
Gain 155, Slew Rate 40
Aircraft Type: CS8
Gimbal Type: 2 axis
Radian Type ( 1, 2 , 3 axis) 1, 2
Gimbal Power source: From Channel 8 of Futaba TX
Gimbal Radio Type:...
Hi, im new with radians and i was looking on the forum threads but i not get a clear idea
My problem is with a shaking or vertical vibration...
Gimbal Type:2 axis
Radian Type ( 1, 2 , 3 axis)1,2 axis
Gimbal Power source: from futabas`s channel 8 r6208sb
Hi Andy, I wonder if at the time of calibration with the camera mounted on the 2 axis gimbal, the servos doesn´t forced when composing the axis in...
Hi, i saw all your post and i want to try some of your configurations but in the wookong`s software i can't modified the gains, when i change it...