Separate names with a comma.
Hi Sean - this should get you starting:
For handheld MOvi Clone- fits Canon 7D and Canon 5d mk III.
Pitch 18 0,12 23 Power 70...
Yes you can - activate a profile with followme, and that profile stays active until you change it.
What settings tilt,roll,pan worked for you...
Hi Kjetil - What camera are you setting up for ?
What motor are you using ?
Do you have balanced the rig c/g ?
Have a look on this from Fabian:...
Hi - put the imu totally level and totally still and hit calibrate
I have the imu for pan/roll mounted on the roll boom (horizontal on top with...
I`m using 3S and got plenty of power. Havent tried 4S, but have som 5S if I need it...
I`m using 2 Alexmos boards Tilt on 1 and Roll and Pan on...
Here is som images:[ATTACH][ATTACH]
I have the imu for pan/roll mounted on the roll boom (horizontal on top with connector to the right, looking from behind)
When tilting down or up 20-25 degres, my roll moves down on one or the other side ???
If I move the tilt back to level, the roll comes slowly...
Hi Kejtil - Steen here from Denmark
Are you using 5208 motors on PAN ???
Could you share your PID settings ?
Anyone who can share PID setting for Alexmos, on the PAN Axis for 5208motor and DSLR (Canon 7D)
I know they all differ, but just as a starting...
I dont know much, other than its, custom rewound 8108 motors for Red type cameras. I`ll ask the company, if they want to reveal more,...
Just heard from a company that custom rewound motors for carrying a RED is available in two weeks ! .
So it seems the torque problem will be...
Hi Mario - it sounds logical, but should`nt the board itself control the voltage ?
On the setup pdf on simple bgc it just states 2-4s, and nothing...
Hi all - when using 5s lipo. Is this correct on AlexMos board:
"If you are running higher than 2S, you will need to jumper the JP1 pads."...
Hi guys - How do you balance and find the sweet spot - dont the brushless motors have to much resistance due to the magnets, so you cant balance...
ok - Thanks
hehe - no it was the sidehandles - Just dont look like the connector on my cs gimbal
Peter where did you get the boom connectors where the handle is mounted. Dont look like the normal ones! Do you have a link?
Hi again. Maybe JohnC or Tabb can comment on what is going on, with the loss of gimbal control and sudden jumps ?
Here are the Radian settings.
Your`re a funny man ! hehe - dont worry - I wont scare it