Separate names with a comma.
now, it works!
Wolf was right.... sort of.
I discovered a broken cable to the tilt motor, wich lost contact only in a certain...
Thank you Thijm,
i will have a look at the two threads and i will check and follow your ideas next monday. My camera is out to shoot this weekend...
Yes, i cut exactly these. I checked all connectors and even replaced the cables.
It seems the sensor on the bottom of the camera mount knows how...
i saw you have managed to extend the 25mm tubes on the side of the M10.
Does this work flawlessly? I extended them and made them a few cm...
here is a youtube clip, showing the (re)binding using a PC. It is the same if you use the android-app.
What rC are you using?
Andy, can you confirm this?
Are there controller, that provide a better range than the Spektrum does? Can you recomend the Futaba T8j or do you...
how did you swap to Futaba? Is it difficult?
Sorry for asking. I am not an RC guy...
Flying the m10 in the last days i discovered something like a range problem. At aproxx 300 to 400meters i discovered that the movi tries randomely...
Try to fix pan axis while booting! I usually put a piece of soft styrofoam between the Lipo cage and the top handle to make shure that pan axis i...
when in Airborne mode and facing straight downwards my M10 snaps heavily upwards into horizontal position.
I figured out this happens...
Yes, i totally agree to Wolf Schiebels post (and to most of the others)!
Wolf, could you please keep us updated about what Freefly told to you at...
It was me, flying with Sebastian yesterday.
We really tried everything. Airborne and Hendheld, setting the Rollstrength up to 40, rebalancing,...
thank you (and excuse me for not beeing able to read the manual).
Shame on me.
Now i can see!
a few weeks ago i noticed heavy...
hope this is not too stupid....
Can anybody explain the differences between the airborne and handheld setting?
I was wondering why...
I had exactly the same issues during the last weeks.
First it massively appeared while flying (remote mode) but disappeared the following days....
Thank you Brad,
i didn't realize that i can scroll down...
Shame on Norbert!
Happy Easter to everybody!
I just took this offday to do the FW update and did it like explained in the Manual given for Android.
... a Mōvi competitor, that will work always and everywhere and completely without batteries!
Made (and grown) in the Bavarian Alps.
I tried the soft-foam-solution while powering up.
... No more pan-drifting. Thanks to Brad Meier!
are there any news in getting the pan-drifting fixed?