Separate names with a comma.
this Gimbal only works with a MIMIC running on 1.3.
It worked with a MIMIC running on a different Firmware before but somehow doesn't now....
No, unfortunately not...
we have a problem binding a MoVI Pro to MIMICs running on Firmware 1.3.1
The MoVI is running on GCU 1.3.2 and the MIMICs on 1.3.1.
we now have the new Chrosziel CDM-100S Motors in Stock...we teamed up with Chrosziel and they modified the motors with smaller Lemo...
It will sit on a M10. Did it last week...
This is also a Setup which our Operator you see in the first picture has rigged up.
we have rigged up a M10 with two Sinacams and it turns out to be an awsome approach!
you can write an email to firstname.lastname@example.org
we have been working on some, what we think, usefull Accessories for the MoVI and want to share them with you!
If you have any Questions...
Hab ich mitbekommen! Gehen heute raus. So soll es sein :)
Anything you want in Hamburg Germany!
So is ours![ATTACH]
Ok Thanks. Lets wait and see...
are you sure the c100 won't fit? The C100 Body is roughly 1kg. Adding Battery, Cards and lets say a 24mm EF Lens which is about 650g you...
Yes! Please find attached Photos...We didn't change a lot versus the Alexa M Modification, In fact it was a little bit easier.
You would still...
wir bauen im Moment eine F55 in die M10.
Ohne Modifikation ist dies zurzeit jedoch nicht möglich. Du musst die beiden Hauptrohre...
we are putting a F55 into the M10 at the Moment. I`ll post some Pictures when we´re done!
We had to extended all the main Rods of the Gimbal using normal 25mm Carbon Tubes to get enough space in the back because we didn't have the fibre...