Separate names with a comma.
Please be aware of a possible issue with the Futaba R7003SB Receiver.
I assume you have the same issue as I still have. As there is not new firmware since March, I assume that the issue has not be resolved.
Do you have an update on this?
I still have to use 2 tx to operate the copter.
On this scenario the Hero 3 is underneath the Galaxy. :)
See a short demo movie I have created with that setup:
Let me share my experience using a Galaxy Android S3 to configure the Radians as good as possible.
With the ’Vibration Monitoring’...
I do have the same issue. Radian worked fine with the Futaba R6208 SB but with the R7008SB it's not working. Not on S.BUS and not on S.BUS 2....
Thank you Josh
To be honest, yes that worries me. Because of this I have chosen ESC’s that can handle a 100 Ampere and I have also connected 4...
4 Scorpion S-4025-10 Brushless Outrunner
4 Master Airscrew propeller 16x10
4 EP-04-0037 mit 100 HV Opto Controller
Thank you Andy
The BOSS together with the Radian creates very good results.
About the video. Thanks for letting me know. I'm currently uploading...
I wanted to share a test video with you, where I recorded a Sony HDR-PJ740VE with a GoPro Camera attached to my Quadcopter.