Separate names with a comma.
the CS8 have same issue laying both on ground and table.
but now I can pan the gimbal by DX8 orginally from the box of M10 which is...
Hi Andy and Chris,
I find the transmitter lable is wrong which the lable pan speed should be "Pan", and the lable pan should be "no control"...
I am using a DX8 to control the M10 and a T14SG.
The left stick left and right moves the RUD indicator on DX8 doesn't work.
Anyone have any experience flying a C8, M10, with dii A2 controller, with a Canon C300? The cinestar has tiger t motors, and TB batteries, etc...
so if you want use m10 after transport, you need adjust left back?
nice, i am wondering to know the monitor mode and how you mount the monitor on m10
I also face problems with M10 and C300 which are
1, mounting a micphone on M10 or C300
2, any 5 or 4 Small Monitor to M10?
I have same concerns as Yudai.
my camera is C300 with Canon, Lecia R, Zeiss Lens.
Does one wireless follow focus could use for all...
thanks for sharing the greatful expirence.
we have meet the low position problem for a long time...but not looks sloved.
btw, if we using...
As the middle photos shows upon. there has two screw on Canon C300.
But as the right photo shows, the plate from Freefly cannot match...
the problem is i screw into the 1/4-20 screws from Freefly into the top mount of C300.
there counldn't screw into any...
Have you ever met that there could only use one screw on the plate that connect M10 with Canon C300?
anyways, the best is have two...