Separate names with a comma.
Your next step would be to contact freefly directly they have the answers you need.
Im not a expert I do not know if this will work. But if you open the OPEN TERMINAL then press REBOOT CONTROLLER.
This might reset it
gentwires maybe the best one for this?
PJ Mozingo contact freefly they are the only people who know
Hey tom I noticed you posted this on the freefly fb page. Anyway I post on here also.
This machine (Alta 8) as a safety arm switch option that...
I am pretty sure fitting the rtk will fix your problem. from what i understand yes you can use the rtk gps without the ground station but...
can you tell us what your binding it to?
you need to contact freefly they will be faster and more knowledge than this forum.
Solid green means the Bind was successful and ready to go.
if you need more info check out page 12 and 13...
contact freefly maybe they have an idea
Would a gentwire work some how?
you need to cut and solder the cables but i think this is possible?
I think your better off sending questions to the freefly guys.
There`s not much information about the gimbal...
This is my conclusion seeing you are using old batteries this probably pretty close. 16.5lbs on the chart would be 8-9mins with new batteries.
There is a stock cable that comes from freefly. Its plug and play. there is more instructions in the manual also but its an easy job.
Jason did you get your problems fixed? If so was it firmware upgrade or something?
alex here is the contact page
Alta x mini? Looks cool.
those 19mm are for the Movi xl you need 15mm ones.
I think this would work....
Yes you can just cut them. They have ends have caps so you can just pull them out and put them into the new ones.
I extended my side bars...