Separate names with a comma.
Yes it is still available.
Walter Klassen Gimbal Wheels for sale
Item placed in EU, Customs paid.
Used just a couple of times for shoot and testing. With new Manfrotto...
A second motor on the zoom ring would work as well, there is a whole lotta room behind the camera to balance it
I made a custom cage with a V-lock plate on the side and an angled connector. later we put it wit a Leica lens.
same result with the LW zooms
with the V-lock battery adapter and a 95Wh battery on the other side matte box and wireless FF balanced perfectly:)
The unusable dovetail plates we replaced with two ninja plates and leftover screws with spacers.
I say unusable because they are increasing camera...
Charles actually we didn't have scales to measure it with the Amira, 22 lbs. was just a guess.
Based on measures the day before when we had scales...
Without the battery behind the balance point the camera would have to be more back for balance and hit the Roll bar since the mass of the...
And similar amount of thanks to Gábor Komora for the Amira
Yeah it works well, behaved normally. I have pics w the ring from yesterday with the dragon-MP setup, here it is.
It is a Dragon, not the...
The Roll bar is ok, the pan motor was hitting the antennas tilting the camera down so we removed them.
Isn't it beautiful.
The busiest part of the year is over so I decided to max out possibilities with my M15. Yesterday we were testing the Dragon with heavy...
It is done.[ATTACH]
And don't forget you can reach the height of inverted mode without changing anything.
Call me vain but it feels funny to be a new member still...
It is true that it is a bit small, when the dual pan tubes hit the ring on the other side it is entering frame anyway and it would enter frame...
The ring is great tool for the gimbal operator because the gear could easily be rested on the belly or just put on the ground between shots or...
Never inverted it since I have the ring. it is a touch lower than inverted but less struggle to change heights.