Separate names with a comma.
Lucky You my friends not living in Sweden, as of last friday flying any Drone with a camera is forbidden. Yes thats right, drone with camera is...
Just wanted to know if anybody did some tests for how long , approx, the std M5 batt lasts during timelapse?
I guess that you do need a bigger one...
Very happy with my M5 and how it works :-)
Been using my MacBook for the configurator, no problems.
This week I got myselt a Samsung 10 inch...
Getting some new motors.
Anybody know the differense between MT 2814-11 710 vs MT Antigravity 2814 710 kv?
Flying single op I´d love to have a setup where the Mövi follows the Yaw of my Cinestar, but not the tilt.
Best of all would be if the tilt could...
Anywhere in Sweden or Europe where I can get hold of these?
Did try Swedish dealer but no :-(
Evolution of lipos is fast, what do you think are the ¨best¨ ones as of today?
Cs 8, Mk stack M5, GH4 with 12-35.
Had problems getting the same stable result with 3.08 as 3.07.
Mostly tilt problems now.
The expert settings...
CS 8 Mk stack, and new Bl v 3.0. MT 2814-11 kw 710. Meijslik 13x4,2 Carbonprops.
AUW with M5 and GH4, 7kg.
Motors 2,4,6 (and 8) get much hotter...
Using M5 on Cinestar 8 with 900 g Camera (GH4 + 12-35).
With al red O-rings it works fine in 0-wind but gets ¨bumpy¨in higher wind.
Does M5 work with Futaba 8FG and R6014FS?
I´m trying to get it working but there seem to be no conection between the R6014FS and the M5 :-(
Anybody fly MK electronics this foldable ¨lobster¨ like copter?
Is there any possibility of flying and filming, in a perfect straight line for 150-300 m without having any unwanted yaw movements...
Enough off MK 2.0 Back to 1.80!!
No problem with downgrading the FC and NC.
BUT using latest 1.80 as soon as I enter settings ...the sw.chrash...
Cinestar 8 with MK stack. GPS, NC.
2x Cinestar Gimbal, brushless converted.
Problem with the small yawcorrections happening...
Got 4 of these 10400mah 35C lipos for my C8 with a auw of 5,6 kg.
MK stack, QC motors and Carbonfiber 13x6,5 props
Normal flight is 7.30...
With the new GPX I think I have heard that you can have a look at your logfiles from inside MK tools??
I can get to see the files on the...
When trying to pan slowly, it is very hard, (seems impossible), to do it nice and smooth without small speedchanges all the time, jitter...
Trying to get smother flight with my CS 8, MK stack.
360 gimbal with radians on tilt and roll
QC motors, with Carbon 13x6,5 from Simon Jardine....
The mounting tape delivered with the Radians is very firm and hard.
Is this material maybe to hard and stiff?
Many other kinds of...