Separate names with a comma.
We will do it next week, I'll keep you updated.
and it is still available....
8300€ - Price update!
Still there, shipping within Europe included!
we'd like to use it to mount the Nokia OZO Cam which will arrive this week.
9000€ as a basis for negotiation!
we are selling one of our ALTAs which we used as backup copter. It was never used on a job, just for test flights and that's why its almost...
I wonder a bit, as the log says that it detects a Radio LOS, this should normally not work when using a Graupner with PPM, right?
I would additionally recommend you to insert a short delay of 3 seconds between
The only thing that you can do is to set the fail safe position properly. This means:
Controls - Neutral
Mode - Position
RTH - On
But this is...
As you are using a Graupner, which is PPM, it will not detect a LOS event, and so it will not auto land...
Concerning the weight: The Alta...
Me too, please.
Bad to hear such behavior, but we have definitely not that kind of behavior recognized with our ALTA. Maybe I can post some...
It might work if you use the auxiliary data port, but there might be problems on the back channel in receiving the telemetry from the movi...
we have the following setup:
Red EPIC Dragon with Motion Mount, Zeiss Compact Primes, Freefly Wedge with two Hedén M21VLE Motors, Connex...
can you recommend a nice data viewer for the .csv files generated by the ALTA? Maybe the Freefly Guys can offer their tool with which...
I will rely on OSD so far. It's not that hard to implement the telemetry, so I guess they'll do it in the future.
managed it finally. It seems, that there is a mistake in the manual. When using the servo plug between booms 4 & 5 it does not work, but...
I tried to setup the ALTA with the JETI DS-16 Remote controller in PPM mode. Unfortunately I cannot map the channels / see any indication...