/dist/images/branding/favicon

Cooling plate for Cinestar 8

Discussion in 'Cinestar 8' started by Jozsef Fekete, Jan 24, 2013.

  1. Jozsef Fekete

    Jozsef Fekete New Member

    Joined:
    Jan 11, 2013
    Messages:
    12
    Likes Received:
    0
    Hello!
    I am searching for cooling plate for Cinestar 8 ,which is going to be update for heavy lifter.I am planning to use the afro distribution board,and just cant find prefered cooling plate for that.
    Is there anyone can help me out?
    Thank You
    Jozsef
     
  2. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Jozesf I don't know that there is a cooling board for the afro distribution board. Send an email over to www.abusemark.com They have always been prompt answering questions. They have a contact form on their website.
     
  3. Jozsef Fekete

    Jozsef Fekete New Member

    Joined:
    Jan 11, 2013
    Messages:
    12
    Likes Received:
    0
    Thank You Gary.
    Do you know any individual cooling plate which can mount to the Cinestar 8?
     
  4. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    No i don't. What are you trying to cool? The only cooling plates I am aware of are ones for the Herkules BL setup.
     
  5. Jozsef Fekete

    Jozsef Fekete New Member

    Joined:
    Jan 11, 2013
    Messages:
    12
    Likes Received:
    0
    I planning to cool the 80E escape`s on the afro distro board.
    I think , they will need the cooling sistem somehow.
     
  6. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
  7. Jozsef Fekete

    Jozsef Fekete New Member

    Joined:
    Jan 11, 2013
    Messages:
    12
    Likes Received:
    0
    That is the board what I going to use,but I was thinking it may need some cooling plate as well to mount with.
    Am I wrong about that?

    Jozsef
     
  8. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Don't think you need a cooling board for the PDB.
     
  9. Josh Lambeth

    Josh Lambeth Well-Known Member

    Joined:
    Jun 29, 2012
    Messages:
    1,315
    Likes Received:
    216
    Just a little note... I have one of these boards and after holding it in my hand I would not trust it to safely supply your ESCs... I am using 50amps on mine and thought it may melt or have other issues. If you are running 80amp ESCs I would not use this board... just my observation.

    Josh
     
  10. Jozsef Fekete

    Jozsef Fekete New Member

    Joined:
    Jan 11, 2013
    Messages:
    12
    Likes Received:
    0
    Thank you Josh!
    I could not find the better one untill now.Still searching.

    Jozsef
     
  11. Jozsef Fekete

    Jozsef Fekete New Member

    Joined:
    Jan 11, 2013
    Messages:
    12
    Likes Received:
    0
    Thank You Josh!
    Do you know about the "Power Hungry Distro board 400A"?How is it?
     
  12. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460

Share This Page