Hi Here is a video explain the problem, please check it here : I'm using the Cinestar 3 axis gimbal with 3 Radian stabilization modules. The RC part consist of a Futaba T12CHP remote and a S.Bus transmitter/receiver system. I have updated the firmware to version 1.03. Voltage of 6V is using receiver Any help and suggestion is greatly appreciated! Thanks, Andy
Can you post a video or a screenshot of your Radian settings on the computer? Do you have your Radian setup with a mode switch? If so, what mode are you in? What happens if you turn it off and back on? Also make sure that you have it set to the tilt module in the software... it almost appears like it's programmed for a different axis and since it's going out of wack it's shutting itself down as the fail-safe... please confirm it's set to the tilt-1. Josh
Also please change your username to your first and last name per this post from Tabb: http://forum.freeflysystems.com/index.php?threads/real-names.497/ Josh
Ah, I missed the receiver power going out... What type of BEC are you using to power your setup? I would test the output with a voltmeter to make sure it's really supplying 6V. Josh