/dist/images/branding/favicon

M15 Tilt motor stepping, not smooth

Discussion in 'MōVI M15' started by Jose Luis Ocejo, Feb 20, 2019.

  1. Jose Luis Ocejo

    Jose Luis Ocejo Active Member

    Joined:
    Sep 20, 2012
    Messages:
    581
    Likes Received:
    44
    Need Help here
    Hi To all my M15 tilt motor started to develop a stepping movement not moving smoothly after many calibration attempts I can't fix the problem take a look at the attached video file
    any ideas
    thanks
     

    Attached Files:

    #1 Jose Luis Ocejo, Feb 20, 2019
    Last edited: Feb 20, 2019
  2. Graham Futerfas

    Graham Futerfas Well-Known Member

    Joined:
    Oct 19, 2015
    Messages:
    1,261
    Likes Received:
    245
    I would first suggest contacting support@freeflysystems.com about it.

    I think I ran into something similar before, and I'm not sure of the exact cause, but I have two other suggestions that may or may not help:

    Take a look at your Hold Strength Settings, and see if they're too high. Or maybe motor stiffness?

    Also, take a look at your cage, and see if it's tweaked or not straight\true in the way the rods are aligned. Try loosening clamps, making sure the cage isn't bound up somehow, and see if that helps.

    Good luck!
     
  3. Jose Luis Ocejo

    Jose Luis Ocejo Active Member

    Joined:
    Sep 20, 2012
    Messages:
    581
    Likes Received:
    44
    Hi Graham thanks for your response I check the cage and it moves quite smooth and freely when power is off
    my Settings strength are at 8,8,8, with a DSLR camera I play with that and the problem persists
    i did contact support and they suggested checking the connection of the tilt cable to the (MCU) and that is also ok too
     

Share This Page