Hi, i have some issue with display menu controller (take a look) display this screen or freeze 5s after boot sequence. I can't calibrate focus motor because display is freeze before movi connection ... have you same experience with your controller ? same issue with 3.0.1 or 3.1.0 controller firmware
Hi FKLAB, welcome to the forum. If it's not too much trouble, would you be kind enough to change your user name to your real first name and last name, please? The reasons for this (and how to do it) are explained here: http://forum.freeflysystems.com/index.php?threads/real-names.497/ Regarding the problem with the MoVI controller, I would suggest that you open up a ticket by sending an email to Freefly Support (support@freeflysystems.com) -- it looks like there may be a hardware issue. Thanks Andy Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. The Ground Is The Limit™ ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
I have the same problem !! I power up the MC this morning and it fail like this ! A friend have also the same problem FF don't want to assume their fault
Hi Math38, welcome to the forum. If it's not too much trouble, would you be kind enough to change your user name to your real first name and last name, please? The reasons for this (and how to do it) are explained here: http://forum.freeflysystems.com/index.php?threads/real-names.497/