Hi Stefan where is the option for indoors or airborne I have connected my air unit to the Connex Managment software and I can't find that option I have version 3.5
Hi guy do you if we can plug the mini connex to the synapse and get the IOSD, we would like to plug a Gopro for FPv camera Thanks
Hi. I am actually using the connex system now as my Paralinx system started getting a bit glitchy after 5 years hardcore use. I actually use the cloverleaf antennas from the paralinx on the connex though with the use of some adapters to the standard sma cable. I have one standard RX for the pilot and the new Long Range panel receiver for the cam op and it’s the best, most stable, longest range system I’ve used out of any paralinx, terradek HD link set up. The long range receiver is rated to 3km with the directional panel but also integrates a 400m multidirectional antenna into the RX which actually gives amazing range. So no more needing someone to spin the panel arround constantly to point at the drone. I hardly ever loose link now. The TX has to be in indoor mode though which pushes the output to 250mw. It’s about 1/4 the cost of a Teradek setup too. If you can put up with HDMI inputs and doing a couple of small mods it is definitely the best system for drone work in my opinion.