/dist/images/branding/favicon

Binding MIMIC to MoVI Pro

Discussion in 'MōVI Pro' started by Alexander Sommer, Oct 9, 2017.

  1. Alexander Sommer

    Alexander Sommer New Member

    Joined:
    Feb 4, 2014
    Messages:
    19
    Likes Received:
    7
    Hi Guys,
    we have a problem binding a MoVI Pro to MIMICs running on Firmware 1.3.1
    The MoVI is running on GCU 1.3.2 and the MIMICs on 1.3.1.
    The only MIMIC we can bind to the MoVI is running on Firmware 1.3.0 without any problem.

    Reverting to 1.2. didnt solve the problem. Does anyone else experienced this?
     
  2. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,383
    Likes Received:
    1,164
    That sounds like a problem that may require FF's technical support. You might want to open up a ticket by sending an email to Freefly Support (support@freeflysystems.com).

    Andy
     
  3. Benjamin Granet

    Joined:
    Aug 31, 2015
    Messages:
    38
    Likes Received:
    10
    Hi Alexander, have you been able to solve your problem?
    I'm having the same kind of problem at the moment.
     
  4. Alexander Sommer

    Alexander Sommer New Member

    Joined:
    Feb 4, 2014
    Messages:
    19
    Likes Received:
    7
    No, unfortunately not...
     
  5. Benjamin Granet

    Joined:
    Aug 31, 2015
    Messages:
    38
    Likes Received:
    10
    From what you're saying, the only mimic you can use is on 1.3
    Was it working all the time?
     
  6. Alexander Sommer

    Alexander Sommer New Member

    Joined:
    Feb 4, 2014
    Messages:
    19
    Likes Received:
    7
    Yes,
    this Gimbal only works with a MIMIC running on 1.3.
    It worked with a MIMIC running on a different Firmware before but somehow doesn't now.
    I hope that the next Firware will solve that problem because the rest is working fine.
     

Share This Page