/dist/images/branding/favicon

Movi PRo + Redrock Follow Focus + Controller

Discussion in 'MōVI Pro' started by anthonysneed, Mar 30, 2017.

  1. anthonysneed

    anthonysneed Member

    Joined:
    Oct 15, 2013
    Messages:
    36
    Likes Received:
    1
    So I have an older Redrock micro Torque motor and I'm trying to get it to work with my Movi Pro and freefly controller. I purchased the Movi Pro Lens Motor cable because Abel Cine said that's all that I need, but I'm still lost.

    Do I need to buy an additional Aux Receiver or something?

    Also can I do away with the Microremote (how else do I adjust torque and sync?
     
  2. Mike Gentilini Jr.

    Joined:
    Aug 5, 2014
    Messages:
    45
    Likes Received:
    11
    FIZ is already integrated into MoVI Pro so you don't need an additional receiver or Wedge. You need to plug in your torque motor cable into the proper input on the right hand side on the bottom of the cage on the TSU. Then you can calibrate the motor in the Wedge menus in the movi controller.
     
    Chen Chien Hsing likes this.
  3. anthonysneed

    anthonysneed Member

    Joined:
    Oct 15, 2013
    Messages:
    36
    Likes Received:
    1
    Cool thanks for the reply. I guess I got confused because the MōVI controller manual is still for the m5/10/15s.

    Thank you I'll give it a whirl and go from there
     
  4. DanDunn

    DanDunn New Member

    Joined:
    Jan 24, 2017
    Messages:
    16
    Likes Received:
    0
    Rolling 2 RedRock TORQUE Motors currently for Focus + Iris. Iris works great on MoVI Controller, but for some reason, can't get focus wheel to work anymore. Mimic Control of both F+I works great.

    Any ideas? I had FOCUS on the Controller working great until I added Iris motor. Calibrated many times. Rebooted. Swapped Motors. Swapped cables...kind of lost.

    Any help is appreciated. Thanks
    Dan
     
  5. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
  6. David Beard

    David Beard Member

    Joined:
    Nov 15, 2016
    Messages:
    41
    Likes Received:
    2
    Have you made any progress with this issue?
     
  7. DanDunn

    DanDunn New Member

    Joined:
    Jan 24, 2017
    Messages:
    16
    Likes Received:
    0
    Dave. Oddly enough, it just started working. Didn't do anything different, but for now it's working nicely.
     

Share This Page