Hi Guys, i am testing my new Toad in the Hole and I ask me, how can i prepared my MoVI like the picture of Freely (see Picture 1 and 2) Now my set up is like Picture 3,4,5. are any solutions for this? I think it is the Cable, that is too short. Thanks in advance.
Ricardo in the FF photos the main camera mount is always on the bottom of the camera. In your setup you have the camera hanging from the camera mount. Flip it over.
Ricardo: In your image #5 you have the camera facing forward and upside down. Simply rotate the movi cage 1/2 turn which will have the camera facing backwards but right side up. Remove the camera, turn it around to face forward, balance and turn your movi on. When turned on in this position it understands that you are using it inverted and works normally.
thank you very much, it is a little bit difficult to understand how do you mean.. but i will try it. It is possible to work with my set up, looking with the camera upside down? I tried it and the camera flip the image for normal filming. My intention is to have a quick workflow between, MoVI Ring, Handheld and Tripod. Without changing so much with balance.
I was wondering? on one of the photos someone had a top rod bracket. Did you make it or where can I get one. Thanks.