This isnthe message that I have when I connected the Mac to the Mimic: "Device is connected but not responding. Do not continue if the device bootstrap jumper is not in place! Do you wish to continue?" Someone can help me!! thank you.
Ricardo what are you trying to do? Software update? Do you have the jumper? It is used if you lock up the system that you are trying to update.
I Gary, I would like to update the softwere, but I can't linking the mimic with the bleutooth and also with wifi adapter. Yes I have the jumper but do you know how I can use it? When i bind both device, the green light of both has the same blinking all the time.
Just had same problem this is how I fixed: Download MIMIC 1.4 Firmware here: http://freeflysystems.com/software-manuals/beta/software-by-product Connect Unplug the 5 pin from the Mimic Transmitter leave plugged into the bigger GPS AND ANTENNA BOX Short pins 1 & 5 with some kind of thin wire. This will cause reset firmware mode to enable Leave the shorted wire in for the rest of the update Plug in the USB cable to power source From computer open the Movi App and connect via bluetooth It will ask if you are sure you want to continue? say yes upload the MIMIC 1.4 Firmware to the mimic. unplug mimic from power source remote the 5 pin cable short plug 5 pin back into smaller MIMIC transmitter box plug mimic back into battery to turn on problem solved. hope this helps. Best, John