So test flight = top of Alta vibrates crazy when tuned from between two chairs. Had to auto tune on ground and the pan gains wouldn't go above 70! also getting massive up and down oscillations on gimbal when in air. I reduced the vertical gains to 9 but didn't do anything. Should I be raising them? Or other settings in the Alta app? Would be great to hear from a freefly rep at some point...
I was under the impression that M10s without a cage were supposed to be attuned at 50%. Is this wrong? should I be doing it at 70%?
i had similar problems and support helped me out. send an email to them!! they can help you - i am sure!
My m10 was vibrating with the A7 a while ago and resetting the M10 to factory defaults helped noticeably. Sometimes, I think a weird setting gets in there and screws something else up.
Tim is spot on. Back to defaults is a good idea. And make small changes trying to isolate the vibration. Use the MoVI GUI to see what is going with each axis.
will give that a go .. Been chatting with Bryan from FF and he mentioned they will test the same setup on their machines and see how it goes, as many people are having the same issues apparently.