Hi, I already send a mail at freefly but I think you can help me We have a M15 on a X8 drone (as you can see in the video). In the second video you will be able to see some shaking. When we stay steady, it won't vibrate, but as soon as we move (or when it's windy) it become shaky. Do you think that with retractable landing gear we won't have theses vibrations ? Do you think we should put different setting for the MOVI when it's windy and when it's not ? The Gyro filter was set on 5, should we change it ? Our firmware 4.02, Setting : Pan 215 Roll 76 Tilt 58 We tried with 195 66 48 but it was worst... we tried also with different gain of the DJI A2, Currently 100% but sometime less 60 or 70 and its the same. Gryphon X8 1000, Herkules III, Tmotor u7 490kv, tmotor 18", blue damper we have also movi M10 and its the same thanks for your sharing
Hi JulianT, welcome to the forum. If it's not too much trouble, would you be kind enough to change your user name to your real first name and last name, please? The reasons for this (and how to do it) are explained here: http://forum.freeflysystems.com/index.php?threads/real-names.497/ Thanks Andy
If those are the Blue Isolator bands from Freefly you may want to try the harder Black o-rings. If the dampers are bottoming out due to weight then it would translate any frame vibrations to the MoVI. Another thought is that the extensions attached to the gimbal plate might also be adding to any issues you are having. Anyway of removing those? They look like they are flexible rubber standoffs. Some folks have found that by having essentially a double setup of vibration mounts they tend to fight each other.
Hi, I change gyro : 3(before5) outputGyro : 4 (before 5) Pan : 250 Roll :85 Tilt : 60 Caméra 2.8kg Movi 15 + Caméra + Connex + batterie = 5.5kg I try many different seeting, and all the time, when I fly with no wind its kind of good, but when there are some wind... its shaking or not good.. thanks
Somebody can show me a vidéo that no vibration with little bit wind or focal like 35mm? thanks for my problem I have only 3kilos in the gimbal, do you think that I have to put more for better result ?