/dist/images/branding/favicon

FIZ info menu disappeared

Discussion in 'WEDGE' started by Alexander Ryden, Oct 8, 2015.

  1. Alexander Ryden

    Alexander Ryden New Member

    Joined:
    Jul 8, 2015
    Messages:
    7
    Likes Received:
    5
    Hello, the FIZ info menu disappeared after controller replacment.
    Wedge and mövi is both binded with mövi contoller and they have lastest firmware.
    But the menu FIZ info is gone from the menus. Its just FIZ config there.
    Before the replacement mövi controller i just binded it to wedge and everything was fine.
     
  2. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Check the firmware version.
     
  3. Alexander Ryden

    Alexander Ryden New Member

    Joined:
    Jul 8, 2015
    Messages:
    7
    Likes Received:
    5
    Like i said, both wedge, mövi and mövi controller have the lastest firmware versions acording to the update page.
     
  4. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Can you post the software version numbers?
     
  5. Alexander Ryden

    Alexander Ryden New Member

    Joined:
    Jul 8, 2015
    Messages:
    7
    Likes Received:
    5
    At first i tryed this versions sense them are the lastest. Acording to the firmware update page.
    http://freeflysystems.com/software-manuals

    MōVI Controller Firmware v1.1.2.0
    WEDGE Firmware v1.0.1
    MōVI Firmware Update v4.01

    SOLVED
    When i tryed the beta version v2.0.5 on MōVI Controller
    The FIZ Main and FiZ Detail menus are back
     
  6. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Alexander that's why I asked about the firmware. I think the Beta on the controller, according to the release notes, is needed for the Wedge. You can check with support@freeflysystems.com but glad to hear that is working.
     
  7. Bryan Edmonds

    Bryan Edmonds Chief Mōvi Whisperer

    Joined:
    Jul 3, 2014
    Messages:
    254
    Likes Received:
    126
    To communicate with the WEDGE and the MōVI, the MōVI Controller and the MōVI need to be running the beta firmware. Current beta versions are 2.05 and 4.02 respectively.

    Once you are running beta firmware on the MōVI, you will also need to update the app on your tablet/computer to the beta version so they are all speaking the same dialect of the same language.
     

Share This Page