/dist/images/branding/favicon

M10 Jumper Cable, Italy Rome

Discussion in 'MōVI M10' started by Ben Fogarty, Mar 7, 2015.

  1. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    The only Bluetooth device is the movi... So unless I'm doing the wiring circuit wrong, I have no idea... I'll send you a picture shortly and check if I'm doing it correctly... Again thanks for all your help and suggestions
     
  2. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    I looked at that, where would I find the older software?
     
  3. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    I did think of trying the older software... Do u have a link to it?
     
  4. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    Sorry for double reply...
     
  5. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Ben did you also update the GUI software to the latest version?
     
  6. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    Yes Gary, reinstalled it a few times, it's up to date
     
  7. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Ok, didn't see mention of the version.
     
  8. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    Gary do you know where I would find 3.08 software?
     
  9. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,383
    Likes Received:
    1,164
  10. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
  11. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
  12. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    Let's confirm this is the correct short circuit then...
     
  13. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,383
    Likes Received:
    1,164
    That's correct. Did you manage to "upgrade" to 3.08?

    Andy
     
  14. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    Hi Andy, Still won't work, thanks for all your help...I think I'll have to wait to get the jumper cable and see what happens...I'm a little concerned there may be some sort of other issue.
     
  15. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,383
    Likes Received:
    1,164
    I agree with you that there might be some other issue -- I've not seen this problem reported before. Telediagnosis is hard to do without asking what seem like dumb questions, but, with that in mind let me ask one other question: did you fall back to using the 3.08 version of the Configurator app to try and "upgrade" to version 3.08 of the firmware for the MōVI gimbal controller?

    I would also double check that the pin 1-5 shorting wire is making good contact....it's such a basic mechanism -- the MōVI's microprocessor is simply forced into the bootstrap loader mode on power up when those pins are shorted together -- there's no "intelligence" involved in the decision -- for which read, there ain't much to go wrong!

    Could you drop me an email to ajohnsonlaird AT me DOT com please?

    Andy.
     
  16. Ben Fogarty

    Ben Fogarty New Member

    Joined:
    Oct 31, 2013
    Messages:
    29
    Likes Received:
    0
    Andy, I didn't change to 3.08 configurator software.... I've ended up shooting it handheld on f55, not what I wanted but we got there....I'll send you an email shortly, back in LA where I have a cable waiting for me...
     

Share This Page