/dist/images/branding/favicon

Extended handles?

Discussion in 'MōVI M15' started by Trevor Rogers, Feb 5, 2015.

  1. Trevor Rogers

    Trevor Rogers Member

    Joined:
    Sep 20, 2013
    Messages:
    99
    Likes Received:
    10
    I would like to get some extended handles for the M15.. Does anyone know if anybody makes them? or should I just try to always run it inverted?
     
  2. Jason Comparetto

    Jason Comparetto Active Member

    Joined:
    Sep 23, 2013
    Messages:
    269
    Likes Received:
    38
  3. jim mundell

    jim mundell Member

    Joined:
    Jan 15, 2014
    Messages:
    240
    Likes Received:
    15
    Handle extensions or just longer handle down tubes would be great. Can get carbon fiber tubes cheap, but a good 90 degree connector is the problem I am running into. All I see are ones for copter joints.
    Would like one that I could easily be removed if we go from shorter handles to longer ones on a shoot.
    Jason, any options?
     
  4. James Adkins

    James Adkins Member

    Joined:
    Apr 13, 2013
    Messages:
    158
    Likes Received:
    21
    We use that T-connector and then put another at the bottom of the vertical leg. An 8" horizontal section of CF tube is placed in the lower Tees. I put some small collars on the ends of the tube so it sits more solidly. This allows the Movi to stand up on its own which is really handy.
     
  5. Aaron Marquette

    Joined:
    Sep 16, 2016
    Messages:
    36
    Likes Received:
    2
    Great idea! Can you please include a photo to show the MoVI standing on its own?
     
  6. Jason Comparetto

    Jason Comparetto Active Member

    Joined:
    Sep 23, 2013
    Messages:
    269
    Likes Received:
    38

Share This Page