Hello everyone, I have a concern about flying my bird in thin air. I have never had to worry about this since I mainly fly in lower sea level altitudes in Arizona. I have a job coming up in Breckenridge Colorado and someone mentioned that I should consider keeping weight down with my bird since I will be flying in thinner air. Breckenridge is about 13,000 feet above sea level. Does anyone have experience or input on this one? I would appreciate any help. My system setup: Tarot Ironman 1000 X8 DJI Wookong M iPeaka 40A ESC's Tmotor 3515 400kv motors 16.5 APC Props Movi M5 W/Panasonic GH4 2x Nano Tech Turnigy 6S 5000MAH Lipo
Jose it should operate fine. If you are overing in the 50% throttle range that is. Fly smooth. Don't expect it to be a hot rod at here in Colorado. It will have better performance in the winter with denser air.
Hey there Gary, thank you for the response on this one. I feel relieved now. I will fly steady and I'll make sure to post something after our shoot. Here is a little something we did with Honda in Las Vegas this Tuesday. Honda https://www.dropbox.com/s/nkqjc9blknzhinb/Honda Aerlal Samples.mov?dl=0