/dist/images/branding/favicon

Moded Zacuto Grip relocator for MoVI use

Discussion in 'MōVI M5' started by Mike Sutton, Nov 3, 2014.

  1. Mike Sutton

    Mike Sutton Member

    Joined:
    Apr 23, 2013
    Messages:
    76
    Likes Received:
    19
    I modified the zacuto grip relocator for movi use. The stock cable was too rigid and short. For this mod I used a hyper thin HDMI cable (since it has the 6 wires needed). As you can see from the pictures it is much thinner and longer now. Works perfect. Soldering was a challenge as these wires are very thin. image2.JPG image3.JPG image41.JPG
     
    #1 Mike Sutton, Nov 3, 2014
  2. frank mckeown

    frank mckeown New Member

    Joined:
    Apr 15, 2014
    Messages:
    19
    Likes Received:
    0
    Hey Mike was this for a Canon EOS camera? I've been trying to find just a cable for these for a c100/c300. Thanks for any info.
     
    #2 frank mckeown, Dec 3, 2014
  3. Mike Sutton

    Mike Sutton Member

    Joined:
    Apr 23, 2013
    Messages:
    76
    Likes Received:
    19
    Yes this is for C100, 300 & 500. I just hacked a hyper thin HDMI cable (you need 6 wires)
     
    #3 Mike Sutton, Dec 8, 2014
(You must log in or sign up to post here.)

Share This Page