Hi . I have a 2.4 Ghz PAL video sender. I used for ages with the steadicam with great results. But when I use it in the Movi with the Spektrum DX7s I get a interference in the image and it is impossible to frame. It seems that the Spektrum use the 2.4 ghz frecuency. Any idea how to solve this?
Gorka not sure that there is a solution other than changing the video transmitter to another frequency. The vast majority of RC controllers are on 2.4ghz. There are some that are on other freq but they require longer antennas. If you can change the channel on the the video TX give that a try.
Gorka try and put a helical antenna on your video TX/RX, but be carefully if your flying this movi don't run your copter control on 2.4 if that's the case.
Thanks Gary. I tried other chanels and the same. But if I put the receiver few meters from the Spektrum the interference is almost gone . Which ones are helical antenna?
You will need to check what sort of connector you have on your video transmitter but this is the kind of thing you want to look at grabbing. http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_45_48&products_id=1536