Very true. Didn't mean to imply otherwise. Right. But the principles I was describing still seem to apply. Correct. Take Bitcoin. Or Justin Bieber albums. See you on the homeworld, GzhhffrY. Andy.
Just saw this. Looks simpler than my messy fix. I'll try this asap and get back to you. Still, why wasn't an aux output factored in
Since we are still in deep freeze here in Ohio I finally had the chance to do this and it worked perfectly. Gary, Not sure if you are a carbon or silicon based life-form but my Epic memory cards asked me to say thanks (101000010010) for them.
Joe Futaba is easier since you can use s.Bus to drive the MOVI and one of the servo ports on the receiver for the camera trigger. What Tx and RX are you using?
Hi Gary, I'm trying to set this up as well. When I plug the servo wire into the Movi on one end and the Elev on the AR6210 at the other end I don't get any lights to indicate it is getting power. Any thoughts on what I might be doing wrong?
G'Day Ashely, Have you got the MoVI powered up, the provided the servo is connected to the correct port you should get 5V through to power the receiver. Cheers Chris
Hmmm .... is the servo wire orientate around the right way. it really should be as simple as pug in the receiver and it should light up
are you using the sbus port on the receiver? ---- Whoops, sorry just checked and my experience level stops with the R6208SB .... which is a different beast .... and manufacturer .... I'll get back in my box now
Thanks for taking a look Gary. Hope the photos are clear enough. When I first swith the Movi on the AR6210 flashes once red but then nothing.
G'Day Jon, You can mount the MōVI to any copter you would like to .... however you will need to build or buy a unique mount for that copter. The MōVI comes ready to mount to the Cinestar 8 (all FreeFly systems) .... after that you are creating your own adapter. Cheers
Ashley it looks like you have a green light on the AR? So can you get the AR and the Sat bound to the TX following the earlier instructions?
I am interested in doing this with a movi m10 but worried that it will affect the reliability or performance. On a paid job its important to look like you know what you're doing.