Kjetil do have a look and aerialcampro.com we are a team of two guys. we have done more work than is on the site but dont get time to update it thanks a ton for all the information hopefully i will sleep in peace tonight hahahaha cheers
Kjetil on the website for the Marinez board picture i can see the sensor lying next to it but for the Alexmos board i dont see the sensor image is it integrated with the Alexmos board i cant seem to find it if i have to order it separately
Ramesh, none of us REALLY know if there is much difference or greater torque gains between the 5208-150t and 5208-180t when using either the alexm or mart boards but we do know for a fact that there are MANY folks using the Alexmos/150t combo with great results with large cameras. Until I hear from several users who have actually used BOTH the alexm and mart controllers and have compared the two using the 150t and 180t I will not be jumping on the 180t bandwagon just because it's something 'new'
Howard thanks buddy that really cleared up my mind ordering only the Alexmos and 150T gonna hit the ORDER button now than a ton.
Howard. can u clear just one doubt i am having does the Alexmos come with the sensor i cant see the image of the sensor near the board do i need to worry about it or just order it as it would certainly come with the sensor.
i was worried cause it say Simple Board.... http://www.funtobuyonline.com/alexmos-v3-0-simple-brushless-gimbal-controller.html I have put the link here could u kindly have a look at it hope i am ordering the complete item and is it a 2 or 3 axis board.... ??? thanks
At the bottom of the page where it says "included" it says all that is in the kit....you're safe to order. Currently you can only order 2-axis. You will need to order a 2nd controller and sensor for the pan axis. ArmIMU v2.0 sensor Power wire Rc wire sensor wire (30sm) optionali you can buy 45sm
Howard thanks a ton for ur time I only hope that since i will use this for TILT and ROLL there will be no issue with my camera is tilted 90 deg down
Hi all - when using 5s lipo. Is this correct on AlexMos board: "If you are running higher than 2S, you will need to jumper the JP1 pads." regards Bison
We use a CC pro bec on 12.5V with a 4S lipo, if you use no bec your voltage will drop and that will change your settings, for the Hott receiver we use a CC 10A bec on 5.1V
Has anyone used the v2 expansion board? Does it work? I know Josh had ordered one. I have not seen much information on this anywhere on the web.
Hi Mario - it sounds logical, but should`nt the board itself control the voltage ? On the setup pdf on simple bgc it just states 2-4s, and nothing more, but Bill uses a 5s and just dont charge it over 20.7 volt, i think he wrote. mayby someone can tell the exact limits, and if direct lipo connection or bec controlled is the best way. "Still trying to learn" regards Bison
Bison welcome to the forum. Would you be kind enough to change your user name to your real first name and last name, please? The reasons for this (and how to do do it) are explained here: http://forum.freeflysystems.com/index.php?threads/real-names.497/.Bison.
It will be exciting to see aerial footage I ordered the Alexmos V3 controller and two 5208 - 150T motors wonder when will they come.. apparently the site say that motors will come from China and controller from Armania ??? my order is from http://www.funtobuyonline.com/
ok i use the alexmos board ,but my friend ask me to tune his martinize board and compare it to the alexmos but is there a software to tune the martiniz board too or do i use the same as alexmos??