Which one would you choose for CS8? I will use 6S and 15x5 props. They all look quite similar, but there is a big price difference. DJI : http://www.buildyourowndrone.co.uk/...gs-Motor-p/dji-s800-spreading-wings-motor.htm KW9 : http://www.kopterworx.com/Latest-products-in-Shop/KW9-pro Tiger: http://shop.jet-1a.com/product_info...=2326&osCsid=a1573dfca78cff87b41dc2f33779f0a8 Tiger: http://www.globe-flight.de/T-Motor-GF-MN4014-9-400KV-mit-60cm-Kabel DJI clone: http://www.fpvmodel.com/4114-motor-320kv-s800_p265.html#special_offer DJI clone: http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=806&productname=
yes, 3kg. What about this: http://www.globe-flight.de/T-Motor-GF-MN4014-9-400KV-mit-60cm-Kabel and Josh is using this ones: http://www.globe-flight.de/T-Motor-GF-MT3515-15-400KV-mit-80cm-Kabel
Also happy with the 3515 (kw10) Did you check the ecalc? Don't forget to set your field elevation http://www.ecalc.ch/xcoptercalc_e.asp?ecalc Thijm
.. anyone using the KW10 or 3515 with MK BL 2.0 ESCs ? Does it work properly ? How do you mount these motors on the cinestar motor plate, it seems the plate is a bit small for them and you can use only 2 holes ?
Doubt that Kopterworx would recommend the BL's for the KW10. THey suggest for mounting that you simply drill new holes in the CS plate. Put two plates together and you can see where to drill the new holes for the proper spacing.
probably you are right, because the 3515 need 6S for best performance, which will not work with the MK BL boards. Anyone using KW8 with the MK BL ? I do not like to convert I2C to PWM, so I would like to stick with the MK BL board.
Hi Thijm. Do you run 5S with your 2826/12s I currently use 4S with mine but just bought some 5S and wondered what you thought. Kat.