I'm looking for a Cinestar 6 frame. If anyone has a gently used one or new one they never used, let me know.
Have you seen this? http://forum.freeflysystems.com/index.php?threads/for-sale-cinestar-6-custom-built-rtf.762/
I have one CS6 frame and i could sell it as i don't need it at the moment. It's built with MT2814 motors, blueseries 40A simonk esc:s and PDB, leds etc, but without flight controller. But i can also tear it down to bare Cinestar parts. Please let me know if you're interested. Best, Kari
Kari, All I am looking for is the CS6 frame itself. I do not need motors, ESC's or any other electronics. How much flight time does the airframe have and has it been in any crashes? Can you send a photo? Thanks Chris
They are new unsanded carbon and the diameter is a tiny bit larger than CS in diameter, I've used longer version of this type on my CS8 and they work flawlessly except that the frame clamps don't quite meet when tightened. A much lower cost than $90 arm. $25 each. Will send exact length and specs if you are interested.
Hi Chris, i have a CS6 complete with WKM and custom electronics carbon fibre mounting plate. I may consider breaking. Are you still looking? Andy
Andy, Yes I would be interested in the frame and possibly the motors and camera gimble if you have it. Let me know Chris
Hi Chris, I dont have a camera gimble with it but these are the current specs of the Copter, and the list price, not including the Wookong and the radio receiver. I can upload images once i get home this evening. Make me an offer. Thanks Andy 1 x Cinestar 6 Frame - £1200 6 x Torxpower 3536 Motors - £38 each 6 x Funfly 40a Opto Pentium ESC's - £27 each 6 x APC 13x6.5 Props - £12 each 1 x Custom cut carbon fibre Plate for Flight electronics £20 1 x Afropower Distro Board £20
Andy, Fiberglass Fabric Tubing with gloss exterior non-sanded. ID .938 OD1.01 15 11/16" cut pieces 6 plus some smaller scraps. Too short for 8s I decided to go with sanded and never used them. 30 day return if you don't like/use them. Sorry for delay. Siberia was cold and we got sick!
Hi John, is Chris who's after the frame/parts, arms look nice though. Chris are you still interested at all, i leave the country for a month next week so wont be able to make any deals for a while. Best Andy