Separate names with a comma.
Thanks Andy! I'll let you know how it goes.
Thanks Sudhava, I may try this. I need to find a lipo-safe bag.
Great advice, many thanks Andy.
Thanks Andy! I checked the gear back in at the station today so I no longer have it in my possession. It's a standard Freefly charger and battery...
I plugged in the T-Connector and the Balance Connector to the LiPo Charger and now the Charge Status light and the 1S light are alternately...
Since a tiny warning device can be purchased for a measly 2 bucks and it could easily be built into the Movi system and programmed to auto-kill...
Thanks Andy, we will def buy some more FF LiPos, but I am understandably upset that this one WHICH WE JUST BOUGHT, is already unusable through...
Re: LiPo tester – First thing I recommended to the Station Manager after reading this thread! We're also going to buy some extra batteries....
ugh. I just learned my first hard lesson as a novice Movi user: "Normal use can destroy LiPo batteries." Our only battery pack is no longer...
Here's a photo I found online of the Movi being used the way I first inquired about. I think my double rail configuration might be superior. [IMG]
I tried another configuration, both cross struts on the bottom. I think this adds more structural support than simply leaving one cross strut off...
Thanks Graham! My research revealed very high marks for the GY-LS300's full auto mode, especially in run 'n gun shoots such as the kind where the...
I'm looking into purchasing a fully auto-enabled lens for the GY-LS300, as it is not feasible to manually focus while the camcorder is on the...
I was able to install with the handle, by removing the top struts and passing them thru the handle, then re-installing both. I created a...
I have managed to install the camcorder, but with any lens no matter what size, it's definitely going to need additional counter balance as you...
